Sight Chokes for SGS-100, 200 & 300 fiber optic Sights

Description

Since 2022 we started producing the SGS-100, 200 and 300 range of Fibre Optic Shotgun Sights with an M6 tapped hole in the ocular end of the sight body. This was to enable future upgrading / accuracy enhancing Sight Chokes to be purchased at a later date. These Sight Chokes have now been manufactured and are available to be purchased as an upgrade.

The Sight Chokes are supplied as a set of 3, each Sight Choke will have a different diameter hole through the centre i.e. 1.5mm, 2.5mm and 3.5mm

Reducing the aperture diameter at the ocular end means greater accuracy by reducing parallax. Obviously using smaller sizes will reduce the light seen by the eye but it does mean that on a day where there is high ambient light levels the smallest / most accurate Sight Choke can be used. All things being equal, these Sight Chokes enable you to maximise your accuracy, by choosing the Choke that works best for you depending on your own viewing resolution limits and lighting conditions on the day. On very low ambient light levels you can choose not to use any chokes and have the full 5mm Diameter of light from the fibre optic.

All you need to fit these chokes is a Key which is supplied!

The 3 sight chokes are 3D printed in PLA. They are super light weight at only 0.4 grams approx. each.

If within 30 days of purchase you are unhappy for whatever reason simply return it, undamaged and we will refund your money 100% no questions asked!